Burkert 8695 Guide Rapide page 7

3. Basic safeTy insTrucTions
These safety instructions do not make allowance for any
• contingencies and events which may arise during the installation,
operation and maintenance of the devices.
• local safety regulations – the operator is responsible for observing
these regulations, also with reference to the installation personnel.
danger – high pressure!
• Before dismounting pneumatic lines and valves, turn off the
pressure and vent the lines.
risk of electric shock!
• Before reaching into the device or the equipment, switch off the
power supply and secure to prevent reactivation!
• Observe applicable accident prevention and safety regulations
for electrical equipment!
6
All manuals and user guides at all-guides.com
english
Type 8695
BasicSafetyInstructions
General hazardous situations.
To prevent injury, ensure:
• Installation and repair work may be carried out by authorized
technicians only and with the appropriate tools.
• After an interruption in the power supply or pneumatic supply,
ensure that the process is restarted in a defined or controlled
manner.
• The device may be operated only when in perfect condition and
in consideration of the operating instructions.
• The general rules of technology apply to application planning
and operation of the device.
The control head Type 8695 was developed with due con-
sideration given to the accepted safety rules and is state-of-
the-art. Nevertheless, dangerous situations may occur.
Failure to observe this operating manual and its operating instruc-
tions as well as unauthorized tampering with the device release
us from any liability and also invalidate the warranty covering the
devices and accessories!