Burkert 8695 Guide Rapide page 23

ElectricalInstallation
9.6. display elements as interface
End position LED green
Bus LED red
Bus LED green
Status LED yellow
Valve LED yellow
(pilot valve)
End position LED yellow
Fig. 13: Display Elements AS Interface
note!
damage or malfunction due to penetration of dirt and humidity!
• To observe protection class IP65 / IP67, screw the transparent
cap in all the way.
All manuals and user guides at all-guides.com
Type 8695
Jumper for
assignment
of end
position
LEDs
Bus led Bus led
(green) (red)
off off POWER OFF
No data traffic (expired Watch Dog at
off on
slave address does not equal 0)
on off OK
flashing on Slave address equals 0
Sensor supply overloaded (Periphery
off flashing
error, manual actuation activated)
Tab. 6: LED Status display bus status
led state
flashing
Status LED yellow
flickers
End position LED green on
End position LED yellow on
LED Valve yellow on
Tab. 7: Display elements AS Interface
Color setting ex works. Can be set via jumper (see "Fig. 13").
3)
english
Teach function is running
Puck PCB not available
End postion bottom
3)
End postion top
3)
Pilot valve is actuated
19