Burkert 8695 Guide Rapide page 6

Authorizeduse
2. auThorized use
non-authorized use of the control head type 8695 may be a
hazard to people, nearby equipment and the environment.
• The device is designed to be mounted on pneumatic actuators
of process valves for the control of media.
• Do not expose the device to direct sunlight.
• Use according to the authorized data, operating conditions and
conditions of use specified in the contract documents and oper-
ating instructions. These are described in the chapter entitled
"6. Technical Data".
• The device may be used only in conjunction with third-party
devices and components recommended and authorized by
Bürkert.
• In view of the large number of options for use, before installa-
tion, it is essential to study and if necessary to test whether the
control head is suitable for the actual use planned.
• Correct transportation, correct storage and installation and
careful use and maintenance are essential for reliable and fault-
less operation.
• Use the control head Type 8695 only as intended.
All manuals and user guides at all-guides.com
Type 8695
2.1. restrictions
If exporting the system/device, observe any existing restrictions.
2.2. Predictable Misuse
• Do not feed any aggressive or flammable media into the pilot air port.
• Do not feed any liquids into the pilot air port.
• Do not put any loads on the body (e.g. by placing objects on it or
standing on it).
• Do not make any external modifications to the device bodies. Do not
paint the body parts or screws.
english
5