Burkert 8695 Guide Rapide page 19

9. elecTrical insTallaTion
9.1. safety instructions
Danger!
risk of electric shock!
• Before reaching into the system, switch off the power supply
and secure to prevent reactivation!
• Observe applicable accident prevention and safety regulations
for electrical equipment!
Warning!
risk of injury from improper installation!
• Installation may be carried out by authorized technicians only
and with the appropriate tools!
risk of injury from unintentional activation of the system and
an uncontrolled restart!
• Secure system from unintentional activation.
• Following installation, ensure a controlled restart.
16
All manuals and user guides at all-guides.com
english
Type 8695
ElectricalInstallation
9.2. electrical installation 24 V dc with
circular Plug-in connector
→
Connect the control head according to the table.
The Teach function can now be used to automatically determine
and read in the end positions of the valve (description of the Teach
function see chapter "10. Teach function").
6
7
8
1
Fig. 9: Circular plug M12 x 1, 8-pole
pin Wire color designation
1)
1 white Limit switch top
2
brown Limit switch bottom
3 green Supply voltage
4 yellow Supply voltage +
5 grey Valve control unit +
6 pink Valve control unit -
7
-
8 -
Tab. 2: Connection with circular plug-in connector
The indicated colors refer to the connecting cable available as an
1)
accessory (919061).
5
4
3
2
configuration
IN 1 (=Top)
IN 2 (=Bot)
GND
24 V DC
Valve +
Valve -
not used
not used