EUROM Force 1801 Mode D'emploi page 47

Clean the water inlet filter
WARNING
Contact an EUROM authorized professional if the filter needs to be replaced.
CAUTION
Remove the filter with the help of pliers.
1. Make sure the device is off.
2. Remove the water supply.
3. Unscrew the garden hose coupling
(Figure 19, pos. 2).
4. Pull out the filter (Figure 19, pos. 1).
5. Clean the filter under running water.
6. Put back the filter.
7. Put back the water garden hose coupling.
Clean the nozzle(s)
1. Make sure the device is off.
2. Remove the water supply.
3. Pull the nozzle (Figure 20, pos. 2) from the
extension lance (Figure 5, pos. 1).
4. Clean the nozzle with the cleaning pin
(Figure 20, pos. 1).
5. Flush it thoroughly (against the direction of
the high-pressure jet).
Figure 19
Figure 20
47