Publicité
Les langues disponibles
Les langues disponibles
13. Drain the high-pressure hose for at least 1 minute.
14. Remove the extension lance (Figure 5, pos. 1) from the jet gun by rotating it 90°.
15. Remove the nozzle or floor cleaner
(Figure 14, pos. 1) by pressing the release
button (Figure 14, pos. 2) on the jet gun.
16. Place all the accessories on the designated
brackets of the device (Figure 4).
Transport and storage
WARNING
Completely empty the device and accessories. Protect the device from frost.
Left over water can freeze and damage the device.
•
Move the device by the handle (Figure 4, pos. 13).
•
Clean the device before storing it.
•
Store the device in its original packaging in, dry and dust-free area.
Prepare for winter / frost-free storage
1.
Clean the device.
2.
Make sure there is no left-over water in the device.
3.
If possible, store the device and accessories in a frost-free of frost-protected room. If
not; suck in anti-freeze before you store it. Use the anti-freeze instead of water.
After winter / frost-free storage
WARNING
If the device freezes, have it inspected by an Eurom authorized professional
before use.
CAUTION
Frost damage is not covered by warranty.
1.
If applicable; clean the device.
2.
Let the device thaw.
3.
If applicable; remove anti-freeze.
44
Figure 14
Publicité
