Publicité
FRONT FORK
25. Loosen:
Rebound damping adjuster 1
G
NOTE:
Loosen the rebound damping adjuster finger
G
tight.
Record the set position of the adjuster (the
G
amount of turning out the fully turned in posi-
tion).
5PA51170
26. Install:
Front fork cap bolt 1
G
Fully tighten the front fork cap bolt onto the
damper rod by hand.
NOTE:
Make sure that there is a clearance a of Zero
~ 1 mm (Zero ~ 0.04 in) between the front fork
cap bolt and locknut 2.
5PA51180
27. Tighten:
Front fork cap bolt (locknut) 1
G
NOTE:
Hold the locknut 2 and tighten the front fork
cap bolt with specified torque.
5PA51190
28. Install:
Front fork cap bolt 1
G
To outer tube.
NOTE:
Temporarily tighten the cap bolt.
5PA51200
29. Install:
Protector guide 1
G
5PA51210
5 - 38
CHAS
15 Nm (1.5 m · kg, 11 ft · lb)
Publicité
