Publicité
KICK SHAFT, SHIFT SHAFT AND PRIMARY DRIVE GEAR
2. Install:
Stopper lever assembly 1
G
To shift shaft 2.
NOTE:
Apply the transmission oil on the stopper lever
assembly.
5PA41070
Shift shaft
1. Install:
Shift shaft 1
G
NOTE:
Apply transmission oil on the shift shaft.
G
When installing the shift shaft, align the stop-
G
per lever roller with the slot on segment.
When installing the shift shaft, make sure
G
that the torsion spring 2 is in the position as
5PA41080
shown.
5PA41090
2. Check:
Shift lever 1 position
G
Gaps a and b are not equal except in
neutral → Replace the shift shaft.
5PA41100
Kick shaft assembly
1. Install:
Kick gear 1
G
Washer 2
G
Torsion spring 3
G
To kick shaft 4.
NOTE:
Make sure the stopper a of the torsion spring
fits into the hole c in the other side of the
5PA41110
stopper b of the kick shaft.
4 - 37
ENG
Publicité
