Publicité
FRONT BRAKE AND REAR BRAKE
5PA50500
5PA50510
5PA50520
5PA50530
5PA50540
5 - 18
2. Install:
Pin boot 1
G
On brake caliper 2.
NOTE:
Apply the lithium soap base grease on the pin
boot inner surface.
3. Install:
Brake caliper bracket 1
G
Bolt (brake caliper bracket) 2
G
30 Nm (3.0 m · kg, 22 ft · lb)
Brake pad 3
G
4. Install:
Brake caliper 1
G
NOTE:
Apply the lithium soap base grease on the
G
guide pin 2.
Install the brake caliper into the guide pin
G
and turn it clockwise.
5. Install:
Brake caliper support bolt 1
G
23 Nm (2.3 m · kg, 17 ft · lb)
NOTE:
Apply the lithium soap base grease on the
brake caliper support bolt.
Rear brake caliper
1. Install:
Pad support 1
G
Brake pad 2
G
Pad pin 3
G
NOTE:
Install the brake pad fitted with brake pad
G
shim 4 on the brake caliper piston side.
Temporarily tighten the pad pins at this point.
G
CHAS
Publicité
