Conti CC200 DISPLAY Notice Technique page 51

 Extraction time on the display:
Allows you to see for each group, the extraction time done to make a coffee.
Extraction time
disabled
To see this «Extraction time» on display, you need to activate this function. This setting is done by
pressing + or -. Button. You need to choose for a 2 groups or a 3 groups machine
When «Extraction time» is activated, display shows:
For a 3 groups
For a 2 groups
Time starts to run from the start of the infusion (pre infusion is not recognized) and ends at the
closing of the solenoid coffee. Time (max 99 sec) is displayed until another coffee is done.
T1 is the extraction time recorded on group 1.
T2 is the extraction time recorded on group 2.
T3 is the extraction time recorded on group 3.
 Pre Brewing utilisation:
Enables or disables pre-brewing on the 2 keys espresso.
Change with + or -.
 Filling the boiler:
Allows to choose the filling of the boiler :
With pump (if the machine works with tank)
Without pump (if the machine is connected on the network)
Edition 06/2019 - CC200 Display - TECHNICAL DOCUMENTS - page 50
SACOME, CONFIDENTIAL Document,
Extraction time
+ ou -
Enabled 2 Grps
T1 T2
XX s XX s
T1
XX s XX s
it is forbidden to duplicate or communicate this document without previous authorization.
+ ou -
T3
XX s
T2
Extraction time
Enabled 3 Grps