Conti CC200 DISPLAY Notice Technique page 50

 Water Filter:
Adjust water volume for the water softener maintenance (0 to 9999 litres)
Press + or – to adjust. (Hold the key for 5 seconds  scroll faster)
To exit, press MENU, or wait 30 seconds.
Change
When water volume is reached, display shows:
H2O filter
Procedure to reset the water counter :
When the programmed amount of water has been consumed by the machine, the message "Change
Filter" and the service phone number to contact, appears on the display
This message prompts the user to change the cartridge system of water treatment but does not
forbid the distribution of products.
Once the cartridge has been changed, you have to clear the message:
- Switch off the machine (the button ON / OFF).
- Keep pressing the keys "P3 Gr1" and "P4 Gr1" (on left group).
- Turn on the machine (the button ON / OFF), the display shows: Reset H2O filter
counter ... wait
The count resumed at zero.
Edition 06/2019 - CC200 Display - TECHNICAL DOCUMENTS - page 49
SACOME, CONFIDENTIAL Document,
it is forbidden to duplicate or communicate this document without previous authorization.