Conti CC200 DISPLAY Notice Technique page 44

24. RELATED FONCTIONS
24.1. ECO MODE SETTING
The evening or before a long period of inactivity, the economic mode of the machine allows the
standby position.
The boiler is then maintained at a temperature of 60°C, which allows:

saving energy when the temperature drop

and during the day, as the setpoint temperature is low, this phase mobilizes little energy.
To activate the "ECO" mode, proceed as follows:

hold the "P5 Gr1" key,

and press "P3 Gr1"

all lights will turn off to indicate the change in "ECO" mode,

the display indicate

And the "L1 Gr1" led blinks slowly (0.2 sec ON / OFF 2.8 sec).
Output of the "ECO" mode allows the machine to return quickly to its normal functionning mode,
without spending lot of energy.
To return to normal operation, proceed as follows:

Press the button "P3 Gr1".

All the LEDs light up to indicate the return to normal operation.

The machine will heat up to reach the programmed temperature.
The display indicate
The machine will heat up to reach the programmed temperature.
Edition 06/2019 - CC200 Display - TECHNICAL DOCUMENTS - page 43
SACOME, CONFIDENTIAL Document,
ECO
CONTI ESPRESSO
117°
CONTI ESPRESSO
it is forbidden to duplicate or communicate this document without previous authorization.