Conti CC200 DISPLAY Notice Technique page 38

20.6. WATER SOFTENER

When the mains water has a high hardness (>10°TH ou >4 °KH), it is recommanded:
o To use a water treatment
o To regenarate regularly the filters.

What is the total Hardness of the water ?
o This is the amount of calcium and magnesium ions in the water.
o These ions are partly responsible for limestone formation.
o It is measured with the test strip provided with the machine.
o The unit of measurement is the ° French (° TH) or the ° German (° dH).
 What is the Karbonat Hardness of the water ?
o This is the amount of Carbonate Calcium ions and Carbonate Magnesium ions in the
water.
o These ions are completely responsible for limestone formation.
o It is measured with chemical dropper testers.
o The unit of measurment is ° Carbonate (°KH)
There are 2 types of water treatments:
 Salt water softeners
o They treat the total water hardness (°TH)
o By an exchange of sodium ions with calcium and magnesium ions.
o They require periodic regeneration of the resins by the user.
o To use when the water hardness is > à 10°TH ou > 5 °GH
 Resins filters :
o They treat the Carbonat hardness water (°KH)
o By fixing carbonate ions on the resins.
o Often fitted with microfiltration and carbon filtration.
o To use when the Carbonat Hardness is > à 6°KH
o Highly recommended by the manufacturer :


Edition 06/2019 - CC200 Display - TECHNICAL DOCUMENTS - page 37
SACOME, CONFIDENTIAL Document,
The machines are equipped with suitable protection in accordance with
flowrate and the water encountered.
The changing cartridges is carried out by the technical service, at intervals to
be determined
it is forbidden to duplicate or communicate this document without previous authorization.