Conti CC200 DISPLAY Notice Technique page 49

 Name:
Type name to be showed on the display.
Press ENTER to go right
To change character press + or –
To finish press MENU
 Service phone number:
Shown on the display together with an alarm message.
Press ENTER to go right
To change number press + or –
To finish press MENU
 Dose programming access:
Dose programming authorization access.
Change with + or -.
 Continual dose access:
Continual dose authorization access.
Change with + or -.
 Temperature unit choice:
°C or °F
All values are automatically converted.
 Steam boiler temperature adjustment:
80 to 125 °C (176 °F ... 257°F)
Adjustment range:
We advise 117°C .
To change temperature press + or –
To exit, press MENU, or wait 30 seconds.
 Filling up Time out adjustment:
Adjust maximum opening time of the inlet solenoid valve ; beyond this time, machine stops and an
alarm message is displayed in order to indicate that no water goes in the boiler.
Adjust time with + or – ( up to 360 sec max)
To exit, press MENU, or wait 30 seconds.
Edition 06/2019 - CC200 Display - TECHNICAL DOCUMENTS - page 48
SACOME, CONFIDENTIAL Document,
CONTI ESPRESSO
Nom du resto
it is forbidden to duplicate or communicate this document without previous authorization.