probst SVZ-ECO-L Instructions D'emploi page 60

Operation
•
The device (SVZ-ECO-L) is equipped with a positioning help (stopper), so that the operator can
move the device (SVZ-ECO-L) directly from the carrier (e.g. excavator) into the gripping good (e.g.
manhole ring) (see Fig. A, B, C).
•
When the positioning help ( stopper ) is not in use, or when gripping manhole cones ( Fig. D ), it
can simply be mounted 180° upside down ( Fig. D ).
6.4 Operating for devices with automatic release
•
The device is connected to the lifting equipment/carrier (e.g. excavator).
•
Before lifting the device, the gripping range has to be adjusted.
•
The device is placed over the product, set down, the device closes round the product and it can be
lifted.
•
Set down on the ground again, the device opens automatically, the automatic release locks it into
position so that the device can be lifted without closing up.
•
Placed over the next product, the automatic release disengages itself and the product can be lifted.
The device therefore is a ONE-MAN-MACHINE.
Shut-down the device without lifting equipment/carrier only on even ground. The gripping arms
must be opened enough, to ensure a secure standing of the device. Otherwise there is a danger
of overturning!
54000034
Fig. A
Fig. C
23 / 29
Fig. B
Fig. D
GB