probst SVZ-ECO-L Instructions D'emploi page 57

Adjustments
5.1.7 Procedure: Adjustment gripping range (NW)
•
To adjust the respective nominal widths (NW), first remove the linch pin (1) on the pin (2) and then pull out
the locking bolt (2), see Fig. 10 and Fig. 11.
•
Position the movable claw or movable suspension (3) at the corresponding nominal width (NW), see Fig. 12.
•
Re-insert the locking bolt (2) into the corresponding hole and secure it again with the linch pin (1). See Fig.
10 and Fig. 11

54000034
Fig. 10


Fig. 12

20 / 29
Fig. 11
GB