Publicité
Les langues disponibles
Les langues disponibles
The displayed information are:
• Cooling and heating climatic curves charts, access to the two climatic curves is carried out by touching
the descriptions on top, "COOLING" or "HEATING".
• Values of the setting parameters of each curve.
For each climatic curve it is possible to:
-
Activate or deactivate the climatic function by means of the icon ON/OFF.
-
Change the parameters of each curve by pressing on the icon of the parameter, entering a password and
the new value.
- Press the icon
The characteristic parameters of each curve are:
• External air temperature for maximum temperature of water
• Maximum temperature of water
• External air temperature for minimum temperature of water
• Minimum temperature of water.
5.8.3 - Alarm
The screen displays the active errors, active overrides and error history.
The overrides DO NOT indicate a malfunction of the system but report a particular operating condition.
In case of error, operation of the heat pump is interrupted.
In this screen:
- Press the button "RESET" and confirm to clear active errors.
- Press the button "RESET" and confirm to reset the active errors history.
EN - 32
to confirm.
Publicité
