en-us_main.book.book Page 30 Thursday, May 25, 2023 5:08 PM
30 OPERATION
2
Select the recipe to edit and then touch the
pencil icon at the bottom left of the screen.
3
Edit the settings for the first cooking stage
and touch Done to proceed to the next
cooking stage, if any.
4
Edit the next cooking stage, touch Done, and
proceed through all cooking stages in the
same way.
5
Once the last cooking stage has been edited,
enter a new name for the recipe or keep the
previous name. Then touch Save.
Deleting My Recipes
1
Turn the Oven Mode knob to select My
Recipe mode.
2
Select the recipe and touch the trash can icon
at the bottom left of the screen.
3
Touch Yes.
Steam Function
Steam cooking uses the moist heat of steam to
cook food. This is an ideal cooking method for
delicate food items such as seafood, which can
lose nutrients when boiled.
The oven provides 2 methods of steam cooking:
Steam Bake, Sous Vide and Steam Combi.
CAUTION
• Take care when opening the oven door during or
after steam cooking. Hot steam can cause
scalding.
• After any steam cooking cycle, the drying
function will run automatically. It is normal to
hear the steam pump running during the drying
function.
Using the Steam Feeder Tank
The steam feeder tank is located over the oven
cavity.
1
Gently push the front of the steam feeder
tank to slide it out.
2
Remove the tank and place it on a flat surface.
3
Remove the tank cover or flip open the fill lid
at the front of the tank cover.
4
Fill the tank to the max line located at the
front of the tank. Use softened, filtered water,
if possible. Hard water may clog the steam
generator more quickly with scale buildup.
5
Assemble the cover or snap closed the fill lid.
Tank cover
a
Fill lid
b
CAUTION
• Make sure the tank cover and fill lid are closed
before putting the tank in the oven.
• Use potable water only.
• Do not fill the steam feeder tank with any fluid or
mixture other than water.
• Do not fill the tank with hot water.
• Fill the steam feeder tank up to the line indicated
on the front.
• Do not tilt the steam feeder tank while it is full.