5.3
General Setting Menu
The General Setting menu allows the user to:
•
configure access passwords for the system and Calibration menu
•
set parameters.
(1)
Enter the System menu.
(2)
In the System menu, select the item for "General Setting Menu" and press [ENTER] to confirm
(see chapter 5.1 "System Menu").
Right button [ ]
Up Button [ ]
Left button [ ESC ]
Down button [ ]
The first of three configuration screens displays.
NOTE: Use [UP/DOWN] to toggle between the three screens:
1
Language:
2
System Psw:
3
Battery Back Up:
4
Calibration Psw:
5
RESET Psw:
NOTE: Setting any above password to 0 disables this password.
Setting required language
Setting system password (factory preset password is: 123)
Select if battery backup is used
Setting calibration password (factory preset password is: 321)
Setting alarm reset password (factory preset password is: 0)
GasGard XL
Configuration
US
31