MSA GasGard XL Manuel D'utilisation page 28

5 ATEX status
6 Channel Number
7 Configuration Grid
8 Battery/Power Relay Control
Example of Relay Configuration
Defines the selected relay is related to the channel being
configured according to ATEX regulation. ATEX channels
are displayed in bold num-bers on the screen. Some relay
para-meters are limited (for example normally energized
status (S: NE) is only allowed to be set.
Relates the relay to the selected channel (bold number
indicates channel is configured according ATEX regula-
tion).
Setting following items to the grid will define the status on
the selected channel that activates the selected relay:
• Alarm 1 is set.
• Alarm 2 is set.
• STEL alarm is set.
• TWA alarm is set.
• Fault is set
Sets the relay that will be energized in case if:
• The main power is off and the Control Unit is powered
from battery.
• The battery voltage is low.
Relay is set using these symbols:
• Not selected
• Selected
GasGard XL
Configuration
US
28