MSA GasGard XL Manuel D'utilisation page 15

3.4 Sensor Connection
• The sensor must be connected to the terminals on the Main board or Sensor Extension board
(See Appendices C and D for details).
CAUTION!
Follow the instructions for components subject to damage from static electricity!
• Incorrect connection of the sensors will not damage the Control Unit or the sensor.
• The wiring diagrams for different sensors are shown in Appendix B. The sensors must be
connected to the terminals using shielded cables.
• For the number of wires and the maximum cable length for each sensor type, refer to the specific
sensor operating manual.
GasGard XL
Installation
US
15