MSA GasGard XL Manuel D'utilisation page 23

The System menu screen displays:
1 Channel Board Identification Mark
2 Relay Board Identification Mark
3 Setting Icons
Channel Number
If selected, the Channel Number allows user to set channel parameters.
NOTE: The Channel board Identification Mark must be selected by user to confirm that a channel
board is inserted in the slot.
Relay Board Identification Mark
The Relay board Identification Mark must be selected by the user to confirm that a channel relay board
is inserted in the slot:
• Left mark is for the first board
(connected to the Main board), counting from the left
• Right mark is for the second board
(connected to the Sensor Extension board), counting from the left).
Setting Icons
Marking icons enable the user to enter an additional submenu:
Relays setting menu (individual relays modification menu; see Chapter "Modifying
Channel Parameters").
Calibration menu (channel calibration; see Chapter 5.4 "Calibration")
General setting menu (general parameters setting; see Chapter 5.3 "General Setting
Menu")
Right button [  ]
Up Button [  ]
Left button [ ESC ]
Down button [  ]
GasGard XL
Configuration
US
23