Operation
General Operation
WARNING: This electric firebox must be properly installed before it is used.
This firebox operates with Comfort$aver
to safely and precisely match the requirements of the room based on the thermostat setting.
!
NOTE: The element retains heat after shutdown. When the heat is turned off, there is a 30-second cool down
period before the fan shuts off completely.
!
NOTE: After a power interruption the fireplace will return to Standby mode and retain the previously used settings.
Power Switch
The main power (On/Off) switch is located behind the front glass in the upper right corner inside the fireplace.
Hidden Touch Controls
The hidden touch controls are located on the upper right of the fireplace. (Figure 19) To activate the controls touch
the area next to the display. After 20 seconds of inactivity, the controls return to the hidden state.
!
NOTE: When in standby mode, the
Remote Operation
The fireplace is supplied with a multifunction Bluetooth remote control. (Figure 20)
App
The fireplace is capable of being controlled using the Flame Connect app for mobile devices. For up-to-date
information about the app, please visit www.dimplex.com/fcapp.
!
NOTE: The fireplace will not operate using the provided remote control when the app is open on a paired mobile
device. A blue LED indicator will illuminate on the fireplace display when the app is in use.
Figure 19
Display
technology, which automatically adjusts the fan speed and heater wattage
TM
remains illuminated.
Figure 20
19