Adjustments - Angelo Po 191BR2EA Manuel D'utilisation Et D'installation

RECOMMENDATIONS FOR ADJUSTMENTS
Important
Before making any type of adjustment, ac-
tivate all the safety devices provided and
decide whether staff at work and those in
the vicinity should be informed.
In particular, turn off the water supply tap,
ADJUSTING THE WELL "FULLY LOWERED" MICROSWITCH
Important
This adjustment must
be made with the well
completely lowered.
To carry out this operation,
proceed as follows.
1 - Undo the screws (C)
and remove the control
panel (D).
2 - Undo the screws (E) to remove the lid (F).
3 - Undo the screw (G).
4 - Position the bracket (H) so that it is touching the
microswitch (L).
5 - Tighten the screw (G).
6 - Fit the lid (F) and secure it with the screw (E).
7 - Replace the control panel (D) on completion of
the operation.
8 - Raise and lower the well to check that the setting
is correct (the well must rest firmly on the fixed
part of
the appliance).
9 - Switch on the appliance (see page 9) and check
that it operates correctly (the temperature light
must be on).

ADJUSTMENTS

cut off the electricity supply using the
master switch and prevent access to all
devices that might cause unexpected
health and safety hazards if turned on.
D
C
- 23 -
D C
F
E
G
L
H
8
IT
IDM-39616701000.tif
GB
DE
FR
ES
IDM-39616201400.tif
English