Set-Up; Item Set-Up; Electric Wiring - Heidolph LABOROTA 4000eco Mode D'emploi

1

Item set-up

Locate basic item on a smooth and solid surface, e.g. lab table or on ROTACOOL reflux
cooler. Item is set-up horizontally.
Locate hot bath (2) feet in rails of console (1a). Controls facing forward.
All of the four feet of the hot bath feature height adjustment, to prevent tipping. Re-adjust
feet as required until hot bath (2) properly is seated on console (1a).
2

Electric wiring

Before connecting with your local power supply, double check to be sure:
your item has been designed for your local voltage as depicted on the data plate
(also refer to "Safety Information" section). Refer to "General", if you use a
different outlet / plug system;

SET-UP

41
E
fig. 1