General; Safety Information - Heidolph LABOROTA 4000eco Mode D'emploi

Unpack your item carefully.
Inspect for damage and report such damage or missing parts to your supplier
immediately.
Read your Instruction Manual carefully. Take the time to read the manual
which will save time while working with your product. Make sure that every
user has read and understood the Instruction Manual.
Please store the Instruction Manual in a place easily accessible to every
IF ALL ELSE FAILS, READ THESE INSTRUCTIONS !
A so-called EURO-plug (DIN 49441 CEE 7/VII 10/ 16 A 250 V) is standard on
all of the products.
For the Continental US they feature a US-standard plug (NEMA
Pub.No.WDI.1961 ASA C 73.1 . 1961 page 8 15A 125V).
For using the item in a country with deviating outlet / plug systems, we
recommend to use approved adapters or to have an electrician replace the
standard plug with one mating your local system.
As shipped, the item features a protective ground wire. When replacing the
original plug, make sure to reconnect this protective ground wire in the new
plug !
Please comply with all safety and accident prevention regulations as in
force for laboratory work !
Use extra care while working with rotary evaporators.
Use eye protection and adequate clothing.
Use extra care while working with flammable substances; refer to safety
data sheets.
Use extra care while working close to flammable and explosive
substances. Motors are of non-sparking type, the item itself is not
explosion-protected.
Before connecting your item with the local power supply, make sure the
item has been designed for your local voltage; refer to data plate on
item.
Connect your item with a grounded outlet only.

GENERAL

user.

SAFETY INFORMATION

39
E