WAGNER HC 940 Mode D'emploi page 43

2
1
4.3 High-pressure hose, spray gun and
separating oil
1. Screw the high-pressure hose (fig. 12, item 1) onto
the hose connection (2).
2. Screw HC 940-SSP • HC 960 and HC 960-SSP dou-
ble socket (3) into the high-pressure hose.
Screw on hose whip (4).
3. Screw connection socket (5) to the spray gun (6).
4. Screw spray gun with selected tip to the high-
pressure hose or hose whip (4), depending on the
model.
5. Tighten union nuts at high-pressure hose and, de-
pending on the model, at the hose whip to prevent
coating material from leaking.
HC 920 • HC 940 • HC 960
GB
2
6. Fill in EasyGlide (fig. 13). Do not fill in too much sepa-
rating oil, i.e. ensure that no separating oil drips into
the coating material container.
EasyGlide prevents increased wear
and tear to the packings.
Attention
Starting operation
4
3
6
1
5
1
1
41