Disposal; Service Address; Technical Data - Kübler Sendix SIL Série Instructions D'utilisation

9.4 Disposal

Always dispose of unusable or irreparable devices in compliance with the waste disposal regulations
in force. We will be glad to help you for disposing of these devices. Contact us.

9.5 Service address

Kübler Group
Fritz Kübler GmbH
-ServiceCenter-
Schubertstrasse 47
D-78054 Villingen-Schwenningen
Germany
servicecenter@kuebler.com
Phone: +49 7720 3903-952
www.kuebler.com

10. Technical data

General technical data of the safety-oriented Sine-Cosine interface
SinCos interface
Max. frequency -3dB
Short-circuit resistance
Pulse rate
Offset
Offset difference A to B
Amplitude
Amplitude difference A to B
Terminating resistor
Phases position
Characteristic safety values for the Sendix
Characteristic safety values
Relevant standards
Classification
System structure
PFH value
d
Service life
400 kHz
yes
1024 /2048 ppr
2,5 V (+/- 100 mV)
Max. 25 mV
1 Vss (+/- 10%)
Max. 40 mV
120 ohm
90° (+/- 12°)
SIL 58xxFS2 and 70xxFS2 encoders
®
EN ISO 13849-1/ EN 61800-5-2, EN 61508
PLd/SIL 2
2-channel (cat. 3 /HFT = 1)
2,16 x 10
-8
20 years
h
-1
ENG - 2 8
( R6 070 9.0 009 )