sylvac D300S V2 Manuel D'utilisation page 32

Step 3: Channel allocation
Bluetooth instrument already connected
Automatic connection from the
"measurement" mode.
To allocate the Bluetooth instrument to a
channel, it is sufficient to select the chan-
nel, then use the « ... » button (also ac-
cessible through the Setting
Measurement Setting menu).
In this menu, parameters such as the value
of Preset, the tolerances, ...can be entered.
Then, to select the instrument to be alloca-
ted to a channel, click "Page 1".
Select the instrument by clicking the white
box as indicated in the figure.
It is possible to select the instrument to be
used manually or automatically, by moving
the measurement probe.
New Bluetooth instrument
Connection possible from the
"Instrument List" menu.
By quitting the
"Setting" menu,
the instrument
MAC address is
recorded.
32