Hot Keys - sylvac D300S V2 Manuel D'utilisation

Page 2: allows a linearity correction using
2 to 25 points. The number of points and
the measurement step can be entered. The
value of the calibration blocks can be mo-
dified during the calibration procedure if it
does not correspond to the measurement
step.

Hot Keys

The functions of the 3 buttons on the right of the screen (see user interface chap-
ter, point 10, 11 & 12) can be configured by the user. It is also possible to define
whether the functions act on the active page, all the pages or the active channel.
The mode button can also be configured. 4 functions can be defined by each
press on the mode button, the different functions are selected successively.
The different functions:
Direct
•
Min
•
Max
•
Delta
•
Mean
•
Delta (sampling)
•
Mean (sampling)
•
Light mode: switches between the min/max/delta/mean/direct modes
•
Full mode: switches between the min/max/delta/mean/delta(sampling)//
•
mean(sampling)/direct modes
Remark: if the "light mode " or "full mode" function is selected the other func-
tions are ignored.
20