sylvac D300S V2 Manuel D'utilisation page 30

In this menu, it is possible to choose to
visualise the backup file. The name of
the file corresponds to the channel name
(can be modified by the user in the Mea-
surement Setting Page 2 menu).
This file can then be transferred on a
USB key in .CSV format. To do this, sim-
ply connect a USB key then click on the
« Transfer » button.
Step 6 : Save the configuration
All the unit's configuration parameters (to-
lerances, presets, setups, ...) can be sa-
ved or restored.
To save a configuration, simply enter the
file name in the intended field and click on
the « Save » button. The name of the file
will appear in the selectable configurations
list.
To restore a configuration, simply select
the file to recall and click on « Open ».
Then you will have to wait a few seconds
while the configuration loads.
30