Retro-Command Codes List - sylvac D300S V2 Manuel D'utilisation

Retro-command codes list

?
?x
x = channel nb (1 to 64)
?x-y
x,y = channel nb (1 to 64)
VER?
SCREEN?
SCREENx
(x = 1 to 8)
CHAx
(x = 1 to 64)
Fsx
(x = 1 to 4)
EXTxFCTy:z
(x = 1 to 4)
(y = 1 to 4)
(z = 1 to 10)
Select Analyse
Type in the "output" window the retro-com-
mand " ? " followed by the "CR" carriage
return ASCII (13) character to display the
value of active channels.
Click on the "send" button
In the Input Data window, the channel va-
lue is displayed.
The unit sends the value of the active channels
The unit sends the value of the selected channel
Ex : « ?6 » the value of channel 6 is sent
The unit sends the value of the array of selected channels
Ex : « ?3-6 » the values of channels 3 to 6 are sent
Displays the version of the software
Displays the active page
Activates the selected page
Activates the selected channel
Ex : « CHA6 » selection of channel 6
Activate the external contact function
X = 1: switch 1
X = 2: switch 2
X = 3: Foot pedal 1
X = 4: Foot Pedal 2
Ex : « FS4 » activates the Foot Pedal 2 function
Configuration of the concerned external contact.
4 different configurations can be allocated to a same external
contact.
A delay between the different functions can be entered thanks
to the « EXTxDELAYy:z » command.
X = 1: switch 1 Y=1: function 1
X = 2: switch 2 Y=2: function 2
X = 3: Pedal 1 Y=3: function 3
X = 4: Pedal 2 Y=4: function 4
24
Z=0: none
Z=1: preset
Z=2: clear
Z=3: print
Z=4: store
Z=5: D110 lowe-
ring
Z=6: D110 lifting
Z=7: D110 lowe-
ring/lifting
Z=8: Hold ON