sylvac D300S V2 Manuel D'utilisation page 29

Step 3 : External contacts configuration
Two pedals will be used, one to create a Preset and the other to record the
values.
Step 4 : The measurement
Step 5 : Visualisation of recorded values
To do this, you must enter the « Setting »
menu then select System setting
I/O Foot Pedal.
In the « digital output Setting » menu :
Select « Foot SW 1 » then chose un-
•
der « Function 1 » Preset.
Select « Foot SW 2 » then chose un-
•
der « Function 1 » Store.
Exit through the « Home » or « Back »
•
button
At present, channel 1 is configured to dis-
play the A+B value of the two selected
instruments and the colour indicates the
measurement's status (according to the
entered tolerances).
Pedal 1 reminds the Preset value and
Pedal 2 records the value.
To visualise the recorded values, you must
select the System Setting
values menu).
29
E
Stored