Tolerance Mode; Number Of Classes; Display Mode; Measurement Mode - sylvac D300S V2 Manuel D'utilisation

Exclusion from automatic detection
It is possible to exclude a channel from automatic instrument detection
when this is moving. This is useful, when for example, the same ins-
trument is allocated to different channels. In this case, when the ins-
trument moves, it is no longer possible to know what channel must be
selected. To avoid this problem it is possible to deactivate automatic
detection on certain channels.

Tolerance mode

This option enables the modification of colours used to indicate statuses.
<=>
GO NOGO
<=> (int)

Number of classes

Selection of the number of classes wanted for the classification of measured
values. It is possible to choose up to 8 classes. The classes are spread out
proportionally between higher tolerance and lower tolerance.

Display mode

Digital : displays the digital value
Bargraph : displays the measurement as a bargraph

Measurement mode

Direct
Max
Min
Delta
Mean
Delta (sampling)
Mean (sampling)
red – green – yellow
red – green – red
yellow – green – red (interior measure)
: displays the value live
: displays the maximum value
: displays the minimum value
: displays the difference (maximum - minimum)
: displays the average (maximum + minimum)/2
: Displays the difference over a given number of samples
: Displays the mean over a given number of samples
13
E