External Contact - sylvac D300S V2 Manuel D'utilisation

Global Tol = : when the general measurement is within the defined tolerances
•
Global Tol > :when the general measurement is more than the defined tolerances
•
D110 lifting : allows control of the D110 unit (lifting)
•
D110 lowering : allows control of the D110 unit (lowering)
•
Channel: allows channel selection when the Channel GO or Channel NO GO
mode is selected.

External contact

The external contacts can combine up to 4 different functions.
Active on: allows configuration of the channels on which the external contact
action will act.
All pages: acts on all the defined chan-
•
nels.
Active page: acts only on the active
•
page channels.
Active channel: acts only on the active
•
channel.
Sequences: acts on the channels confi-
•
gured according to the "Sequence"
menu.
Function: Pedal function configuration. Up to 4 different functions can be combined.
A delay between each of the functions can be defined in milliseconds.
Delay: Configuration of waiting time between 2 functions in milliseconds
Auto Repetition. : Activates or deactivates automatic repetition of functions
configured on the external contact. This typically permits recording of a measu-
rement every x seconds.
15
E