Configuration Example With Two Measurement Points - sylvac D300S V2 Manuel D'utilisation

Configuration example with two measurement points

Step 1 : Display configuration
We start by configuring the number of pages and channels to display.
Step 2 : Channel attribution and configuration
Once the display is configured, we can select the instruments that will be allo-
cated to the different channels and enter the tolerance and Preset values.
To do this, use the « page... » button (also
accessible through the Setting
System Setting menu).
For our example, we will display 1 channel
per page. Once the data is entered, use
the « Home » or « back » button to exit
the « Setting » menu. The modifications
are automatically saved.
27
E