Publicité
Les langues disponibles
Les langues disponibles
Built-In Multifunction Oven by Cooke & Lewis
Fitting the appliance
Important
> The adjacent piece or furniture or cupboard and all the materials used
in the installation must resist a minimum temperature increase of 85 ºC
above the ambient temperature during use of the appliance.
> Certain types of vinyl or laminated kitchen furniture are particularly
susceptible to damage due to decolouration at temperatures below those
indicated.
> If the appliance is installed without paying attention to this temperature
limit or if it is placed less than 4 mm from the adjacent cupboards, liability
will belong to the owner.
Installation notes
1. The oven has to be installed in a standard gap of 600 mm, as indicated
in Fig. 1, whether under a hob or in a column.
2. On inserting the oven in a column, it is essential in order to ensure
there is enough ventilation, to remove the rear panel of the furniture
and have an opening of at least 85 - 90 mm as indicated in Fig. 1.
3. Check that the oven has been fixed securely in the housing. Fixing
the oven into the cupboard is done using 4 screws
each corner of the oven door frame.
A110087_KSO_CLMF2BK-C_EN_FR_9-1-2012.indd 15
All manuals and user guides at all-guides.com
90
90
Min.
550
593
90
564
02
Min.
550
593
525
564
572
GB
Installation
IE
. One in
533
20
595
595
Fig. 1
15
09/01/2012 5:14 PM
Publicité
