Publicité
Les langues disponibles
Les langues disponibles
noises heard when rotating the pedals backwards occur for
technical reasons and have no negative consequences.
Noise emissions are greater when loaded.
Before each training, make sure the protective devices are
operational and bolt and plug connections are tight.
Wear appropriate (sports) shoes during the training.
MAINTENANCE
Carry out maintenance activities at regular intervals. The tasks listed
below should be carried out at least every 20 hours of operation.
Check moving parts of the device. If they need lubrication, use a
bicycle bearing grease.
Check the conditions of such parts as bolts and nuts.
Make sure they are tight.
Wipe the sweat off the device after each training. Make sure the
display does not come in contact with water or moisture.
Clean the product with soapy water only. Do not use cleaning
agents.
Store the device in a dry and warm place.
Do not expose the device to direct sunlight.
ENVIRONMENT
The device is delivered in a package to protect it against any possible
transport damage. The packaging is made from non-processed
material and can be recycled. Throw the materials to appropriate
colour containers for selective waste collection.
Protect the environment and do not throw used batteries into
household wastes. Return them to the point of sale or a special
recycling centre.
ASSEMBLY DIAGRAM (→ See page 2)
ATTENTION! Do not use parts other than those provided by the manufacturer.
PARTS LIST
No.
Description
1
Main frame
2
Seat frame
3
Seat railing
4
Saddle guide
5
Handlebar post
6
Front base
7
Rear base
8
Seat adjustment lock
9
Bolt M8xL76
10
Bolt M8xL45
11
Acorn nut
12
Curved washer Φ20×8.5×R30
13
Spring washer D8
14
Hexagonal bolt M8x16
15
Washer D8×1.5×Φ16
16
Axle spring washer D12
17
Axle spring washer D10
18
Eccentric gear
19
Eccentric shaft
20
Small sleeve
21
Large sleeve
22
Hexagonal bolt M6x10
23
Bottle holder
24
Cross-head screw
25
Transport assembly
26
Levelling pad
27L/R
Pedal
28
Adjustment knob
29
Flat washer
30
Computer cable
Used electrical equipment (including the computer and power supply)
are recyclable. Do not throw them out with household waste as they
may contain substances dangerous to the health and environment. You
can actively contribute to sustainable use of natural resources and the
protection of the natural environment by handing the used device to
a recycling centre for used electrical devices.
ASSEMBLY
The device must be assembled carefully by an adult. In case of doubt,
ask a more experienced person for help.
Prior to the assembly, make sure the set contains all
the listed elements and whether none of the parts was damaged
during transport. If any parts are missing or you have any other
reservations, contact the seller.
Have a look at the drawings and explanations and follow the
assembly manual when assembling the device.
Be careful during the assembly. There is a risk of injury when
using the tools and parts.
Remember to keep your surroundings safe. Do not let tools and
parts lie around in chaos. Remember that plastic foil and bags
pose o suffocation risk to small children.
Assembly parts necessary for a specific step in
the assembly manual are shown in pictures and included in
instructions. Use the elements indicated in the assembly
manual.
Do not tighten parts completely during the first stages
of the assembly. Tighten connections after all parts are placed
and fitted properly.
The manufacturer may have assembled some parts.
Quantity
No.
Description
31
1
Grip foam
32
1
Seat guide cap
33
1
Saddle guide cap
34
1
Bearing
1
35
Bracket
36
1
Seat
37
1
Seat backrest
1
38
Heart rate cable plug
39
4
Handlebar mount cap
2
40L/R
Crank
6
41
Heart rate measurement cable
42
10
Heart rate connecting cable
16
43
Connecting computer cable
44
18
Computer
45
26
Heart rate measurement cable
1
46
Self-threading screw ST3x10
47
1
Hole plug 60×30×1.5
48
1
Self-threading screw ST4.2x18
49
1
Handling grip
50
1
Hexagonal bolt M8×75×L20
1
51
Lock grip foam
52
4
Power supply unit
53
1
Handlebar angle adjustment T handle
2
54
Handlebar cover
55
2
Separator
56
2
Handlebar grip
1/1
57
Grip foam
58
1
Nut M10
2
59
Cross-head screws
60
1
Bottle
EN
Quantity
2
2
2
2
1
1
1
2
2
1/1
2
1
1
1
2
2
1
2
1
2
1
1
1
1
1
2
1
4
1
14
Publicité
