Mizuho SUGITA Mode D'emploi page 16

the individual sterilizer and assure the sterility.
Sterilization equipment should be cleaned and
maintained in accordance with standardized operating
procedures specified by its manufacturer.
Clean and sterilize the clip applier according to the clip
applier instruction manual.
This clip and instruments must be cleaned to reduce
bioburden before first sterilization and resterilization.
Do not use chlorine-based solutions when cleaning this
product. This could cause metallic corrosion.
1) Cleaning
Put the clip in the designated Sugita Clip Case or Sugita
Clip Tray (hereinafter this is called "clip case or tray" )
and close the lid.
<In case of using Ultrasonic cleaner>
(1) Fully immerse the case (tray) in the water (tap water)
of the washing tank.
－15－