Instructions For Installation; Setup - Bartscher A120788 Mode D'emploi

•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.
•
Do not move or tilt the device when in operation.
•
Never use the device with wet or moist hands.
•
Never leave the device unattended when in use.

5.2 Instructions for installation

CAUTION!
All installation maintenance and repair work should be performed by an
authorized professional!

5.2.1 Setup

•
Unpack the device and remove all packing material.
•
Attach the included feet and adjust their height by screwing them in or out.
Do not activate the device without feet attached.
•
Carefully remove the protective film from the device's internal walls to avoid leaving
glue. If any glue remains, remove it with an appropriate solvent.
•
Put the device in a safe place, on a flat surface capable of supporting the device's
weight when full and resistant to heat.
•
Never place the device on a flammable surface.
•
Do not place the device near an open flame, electric oven, heater or other source
of heat.
•
Do not place the device near walls or other objects made of flammable materials.
Maintain a minimum distance of 10 cm on all sides. Leave enough space to open
the glass pane door and for the person operating the device.
•
Place the device to avoid blocking the flow of air through the ventilation ducts at the
rear of the device.
•
Do not place any objects on the device.
NOTE!
The device is not designed for serial installation!
- 29 -