Possible Malfunctions - Bartscher A120788 Mode D'emploi

7. Possible Malfunctions

Problem
Device connected to
the power supply, but
the green operation
control lamp is not lit.
Device connected to
the power supply, but
does not heat up.
Device is connected to
power supply, but
does not work.
Cooking/roasting
result is uneven.
Cooking cavity lamp is
defective.
If you cannot eliminate the malfunction:
- Disconnect the device from the power supply (pull the plug!),
Do not open the housing,
-
- Notify customer service or contact a dealer.
Cause
• Mains plug not inserted
properly.
• Main/time control knob
not set.
• Temperature not set.
• Heating element is
defective.
• Overheating protection
device has tripped.
• Fan is defective.
• Temperature control
knob is defective.
• Distance between food
and baking tray above
the food is too low.
• Light bulb is defective.
Remedy
• Disconnect mains plug and
insert it properly.
• Set the main/time control
knob.
• Temperature not set.
• Heating element is defective.
• Let the device cool down.
Press the RESET button at
the rear. When overheating
protection device trips, contact
service or notify your dealer.
• Contact a dealer
• Contact a dealer
• Keep the minimum distance
of 40 mm.
• Disconnect the device from
the power supply and let it
cool down. Unscrew the bulb
and replace it with the one
having the same technical
characteristics (220 V, 15 W).
- 39 -