Maintenance; Wear Parts - Schindelhauer Bikes Arthur 2020 Notice D'utilisation

7. Maintenance

Please bear in mind the following safety instructions
during maintenance operations:
• Turn off the Mahle Ebikemotion eBike before you start
working on your e-bike
• Never turn your e-bike upside down for maintenance
or repair. This might damage the brake system.
• Extra caution is advised when working on rotating
parts (e.g. wheels and belt drive). Danger of crushing!
• Always wear gloves when working on parts with sharp
edges like mudguards or brake discs. Danger of injury!
Your Schindelhauer e-bike is subject to both environmen-
tal and physical influences due to ground properties, and
the forces you apply to the e-bike. This causes wear and
tear in multiple parts and components of the bike. Please
perform regular checks on your e-bike and look out for
cracks, scratches, bends, as well as stains and discolora-
tion, etc. Components that passed their lifespan may fail
suddenly and without prior warnings. Please regularly take
your Schindelhauer bike to professional inspections, where
worn parts can be replaced. Please find further informa-
tion on maintenance and safety in chapters 8 on page
81 and 10 on page 83.
In the interest of your own safety, please do not over-
!
estimate your own abilities when doing any work on your
bicycle. When in doubt, always contact one of our Schin-
delhauer dealers, or us directly.

7.1 Wear parts

The following parts of your e-bike experience functional wear and tear
which is not covered by product warranty:
• battery
• tyres and tubes
• brake pads and brake discs
• front and rear sprockets
• tooth belt
• all moving parts (e.g. bearings)
• lubricants
• grips
• saddle
• all surfaces including paint
• rubber seals
• VarioStraps of the front rack
• grip tape of the pedals
EN
71