Saddle Height Adjustment - Schindelhauer Bikes Arthur 2020 Notice D'utilisation

3.4 Saddle height adjustment

1. Loosen the bolt of the seat post clamp (5mm hex key) on the right side
of the frame to allow adjusting the saddle height.
2. Start with the saddle at the height of your hips when you stand next to
the e-bike and tighten the bolt of the seat post clamp to 8 Nm.
EN
3. Check the saddle height with the crank arm pointing downwards (fig. 6 )
by sitting on the saddle, e.g. leaning against a wall. If in doubt, ask a
second person to help you.
6
When adjusting the saddle height, pay attention that at
!
least 3 LEDs of the LightSKIN seat post are visible (fig. 7 )
to ensure that light output is sufficient and to meet
German traffic law requirements.
Never use your Schindelhauer e-bike if the MIN. insertion
marking on your seat post can be seen!
58
7
LightSKIN seat post
MAX
MIN
76.0
70.0
!
MAX/MIN
ANGLE
Part NO.
minimum
K-number
ISO-4210
insertion
ROHS
depth
CE
(100 mm)
SERIAL NO.
!
maximum insertion depth