Service- And Maintenance Intervals; Tire Width And Pressure; Possible Gear Ratios - Schindelhauer Bikes ThinBike Notice D'utilisation

Service- and maintenance intervals

After an initial break in period, your bike will have to be maintained and
serviced in regular intervals and certain components will have to be
checked and/or replaced. Ideally, your Schindelhauer Bikes dealer should
EN
perform this maintenance. The intervals stated in the following table are
meant to function as a guide for people that travel an annual distance of
Component Task/Activity
Check tire pressure
Tires Skid depth control
Check for ruptures on the flank
Brakes Control brake pad thickness
Brake cables/-lines Visual check
Check
Aluminum fork
Replace
Visual check
Gates belt
Check tension
Check bearing play
Gear-hub
Check function
Check bearing play
Inner bearing
Grease (frame thread
Pedals Check bearing play
Crank Check and retighten
Paint finish Conserve
Control true run
Wheels / spokes
Check spoke tension
Check for bends and cracks
Handlebar/ stem
Replace
Headset bearing Check bearing play
Metallic surfaces Conserve (exception: Brake disks!)
Axle bolts Check / retighten
36
1500-2500 km with their bike. More frequent use or bad street conditions
mean these intervals have to be shortened accordingly.
o With adequate technical- and mechanical comprehension, you
may carry out these operations on your own.
x Your Schindelhauer dealer should carry out these operations.
Before every ride Monthly Annually Other interval
o
o
o
o
x
x min. biannual
x after crash or every 3 years
o
o
x
x
x
x
o
x
o
o
o
x min. biannual
x after crash or every 3 years
o
o
o
Component Task/Activity Before every ride
Nuts and bolts Check / retighten
Valves Check fit
Seat post Grease clamped connections

Tire width and pressure

Model Tires Nominal width
ThinBike Schwalbe Kojak 40mm
The maximum allowed tire width for the ThinBike is 40mm
i
(measured width). The nominal width stated on the tire

Possible gear ratios

Front sprocket Rear sprocket Gear ratio Number of
teeth (belt)
50 22 2,27 111
50 24 2,08 113
Bold print = default gear ratio
Monthly Annually Other interval
o
o
o
recommended tire pressure Maximum tire pressure
3,5-5 bar 6.0 bar
flank and the actual measured width may differ depending on the
manufacturer.
You may order pulleys through Gates or Schindelhauer
i
Bikes. Let a specialized dealer carry out the modification
as special tools are needed.
EN
37