Publicité
Les langues disponibles
Les langues disponibles
Attention! The whole memory is deleted. Partial deletion of the stored welding se-
quences is not possible.
The device saves up to 2,000 welding sequences automatically. If the 2,000 memory places are
filled up the device displays an appropriate warning on the Start screen. A further 47 welding
sequences are stored in the overflow memory.
Attention! Loss of data can occur if a welding sequence is performed despite a full
memory. We recommend backing up the logs in good time using a USB stick and
clearing the device memory regularly.
Password
This is where the password for the protected area "Parameter" can be altered. Press the
>CHANGE< button to change the password. The change takes place manually (see also the
Chapter "Data entry").
Maintenance
Password-protected area (excluding ROTHENBERGER service personnel or authorised special-
ist partner).
Contrast
The contrast of the display can be adapted here to the environmental conditions. The contrast
can be altered using the arrow keys >+< and >-<. The sub-menu can be exited again using the
>arrow to the left< button.
8
Information / Error Diagnosis
Press the multi-function key >INFO< on the Start screen.
The following information is displayed:
Product .............................. Name of the product
28
ENGLISH
Publicité
