Additional Accessories - Redmond RMC-280A Manuel De L'utilisateur

VI. ADDITIONAL ACCESSORIES
Additional accessories for the Multicooker REDMOND RMC-280A can be purchased separately. Information on the assortment, pricing, and compatible
accessories is available through WWW.MULTICOOKER.COM and our authorized dealers.
VII. BEFORE CONTACTING SERVICE CENTER
The following table gives the error codes that appear if multicooker malfunctions.
Error
Error Description
Code
E1 – E4 System error (possible temperature sensors failure).
E5 Overheat protection was activated.
Common Problems and Possible Solution
Problem
The unit does not switch on Voltage supply failure
Voltage supply interruption
There is a foreign object between the bowl and the heating element
The dish is taking too long to cook
The bowl is not properly positioned
Heating element is dirty
The packaging, user manual and the device itself may not be treated as household waste. Instead, it shall be taken to the applicable collection point for
the recycling of electrical and electronic equipment.
© REDMOND. All rights reserved. 2015
Reproduction, transfer, distribution, translation or other reworking of this document
or any part thereof without prior written permission of the legal owner is prohibited.
Do not operate the appliance with an empty inner bowl!
Unplug the appliance and let cool down for 10–15 minutes, add water/stock, and resume cooking.
If this does not eliminate the error, contact an authorized service center.
Possible Cause
Multicooker RMC-280A
Error Handling
Solution
Check voltage supply
Check voltage supply
Remove foreign object
Position the bowl properly
Unplug the appliance and let cool down. Clean heating
element.
ENG
21