When used on a regular basis, inner nonstick coating of the bowl may
partially or completely change color, which does not indicate a defect.
To Clean Inner Aluminium lid
1. Open the main lid.
2. Press the plastic holder located on the inner side of the lid; gently
pull the inner lid toward yourself to remove.
3.
Wipe the surfaces of both lids with a damp soft cloth or sponge.
Rinse the inner lid under running water and wash with mild soap, if
required. Do not use a dishwasher to clean.
4. Wipe the lids dry.
5. Insert the inner lid into the lower slots on the main lid and align until
they click.
To Clean Removable Steam Valve
It is recommended to clean the valve after each use. Gently pull the valve,
holding it by the ledge. Disassemble the steam valve, rinse thoroughly
under running water, and let dry. Reassemble the steam valve and place
back into original position.
To Remove Condensation
Condensation may accumulate in the special cavity on the housing around
the bowl . Use a cloth or tissue to remove.
To Clean the Cooking Chamber
Compliance with the user manual guidelines minimizes the risk of food
particles or liquid accumulating inside the chamber. However, if the inside
of the chamber gets dirty, clean it to prevent improper operation or mal-
function of the unit.
Before cleaning the chamber ensure, that multicooker is unplugged
and has cooled down!
The surface of the chamber, the heating disk, and the casing of central
thermal sensor (located in the middle of the heating disk) need to be
cleaned with a damp (not wet!) sponge or cloth. Remove any traces of soap
or detergent if using any.
14
If there is a foreign object in the cavity around the central thermal sensor,
carefully remove it using tweezers, trying to avoid pressing on the casing
of the sensor.
Clean the heating disk with a damp medium-hard sponge or synthetic
brush, if required.
When used on a regular basis, the heating disk may partially or
completely change color, which does not indicate a defect and does not
affect proper operation of the unit.
To store the appliance
• Unplug the appliance. Make sure that the chamber, heating disk, bowl,
inner lid and steam valve are dry and clean.
• You may store all additional accessories inside the removable bowl
for easy and compact storage.