Reference Standards; Data Plate; Boiler Decommissioning; Instructions For Requesting Assistance And Replacement Parts - Cola DOMUSFIRE C17 Manuel D'installation, D'utilisation Et D'entretien

1.7 Reference standards

Standard UNI 10683:2012 :
Standard UNI EN303-5:2012 :
Standard UNI 10412-2:2009 :
Standard CEI EN 60335-1 :
Standard CEI EN 60335-2-102 :
Standard CEI EN 55014-1
Standard CEI EN 55014-2 :
Standard CEI EN 61000-3-2 :
Standard CEI EN 61000-3-3 :
Standard CEI EN 62233 :
Standards DIN plus 51731
UNI EN14961-2
Ö-Norm M 7135 :

1.8 Data plate

The data plate is visible on the inside of the pellet hopper door or on the back of the boiler. It gives the following
data. On it are listed all the technical data in the table on pag.7.

1.9 Boiler decommissioning

When the unit is no longer to be used, disconnect it from the power supply and empty all pellets from the hopper. For
disposal, the boiler must be sealed inside strong packing; contact the local authority in charge of such operations in
order to proceed according to the current local regulations, or take it to the dealer when purchasing a similar new
unit.
The barred waste bin symbol on the label indicates that, at the end of its service life, the unit must be
collected separately from other household waste.

1.10 Instructions for requesting assistance and replacement parts

To request any assistance and/or replacement parts, contact the dealer, area importer or the nearest authorised
service centre, clearly specifying the following: boiler model, serial number, date of purchase, list of replacement
parts, details of faults or malfunctioning.
All operations on components must be carried out by authorised and/or qualified personnel.
Make sure all electrical connections are disconnected and that the boiler is cold before any work on it.
Only use original replacement parts.
Installation requirements for heat generators burning wood or other solid
biofuels;
Terminology, requirements, tests and marking relevant to Boilers for solid
fuels, with manual and automatic feed ;
Safety requirements for domestic-type heating units using heat generators fed
with solid fuel - part 2 ;
Safety of electrical appliances for domestic and similar use - part 1;
Safety of electrical appliances for domestic and similar use - part 2;
: Electromagnetic resistance - Requirements for electrical appliances, electric
tools and similar electrical equipment - Part 1: Interference;
Electromagnetic resistance - Requirements for electrical appliances, electric
tools and similar electrical equipment - Part 2: Immunity; Product family
standard;
Limits for harmonic current emissions (Input current ≤16 A per phase);
Limitation of voltage fluctuations and flicker in low voltage supply systems for
equipment with nominal current ≤ 16 A;
Measuring methods for electromagnetic fields of electrical household
appliances and similar with reference to human exposure.
Standards regarding the specifications and classification of pellets.
43
DOMUSFIRE C17-C24 HR