Accessories; Ordering Information - MSA Advantage 200 S Manuel D'utilisation

ADVANTAGE
4.1 Half mask
Cleaning and Care: Clean and disinfect halfmask after every use. To
clean the half mask remove the filters (cleaning the
filters is not possible). Use a mild detergent in
lukewarm water and rinse with clear water and dry
air (max. 50°C).
Spare parts: Spare parts are not provided.
Storage: Only undamaged half mask must be stored for fur-
ther use. When not in use, store respiratory pro-
tective device in cool, dry and clean ambient air.
Shelf life: The manufacturing date of the half mask is marked
inside. Example (see Fig. 7): Manufacturing date
April 2006
4.2 Filter
Filter Proper Storage
Factory sealed gas or
•
combined filters:
•
Opened gas or combined
•
filters that are to be
•
reused:
•
•
Factory sealed particle fil-
ters:
•
•
Particle filters that have
been used against radio
active substances, micro
organisms or bio chemi-
cally active substances:
Factory sealed and properly stored MSA respiratory filters are
maintenance free.

5 Ordering Information

5.1 Half Mask
Description
Advantage 200 S (small)
Advantage 200 M (medium)
Advantage 200 L (large)
200
®
-5 to 50°C, max. 90 % relative humidity for
long-term storage
Storage life: See information on the filters (pic-
togram "Hourglass")
In a closed plastic bag
5 to 35°C, max. 60 % relative humidity
Storage life: replace 6 months after first use at
the latest!
-5 to +50 °C, max. 90 % relative air humidity
(see pictograms)
Storage life: See information on the filters (pic-
togram "Hourglass")
Single use only, do not reuse!
No further storage.
Part No.
430357
430356
430358
11 9
5.2 Respiratory protective filters
Attention!
!
Only use undamaged filters of the same type and class.
Always replace both filters at a time.
Filter Description
20 P2 particle [pre-]filter
200 P3 particle filter
201 A gas filters
201 K gas filters
201 ABE gas filters
201 ABEK gas filters
202 A-P3 combination filters
202 K-P3 combination filters
202 ABE-P3 combination filters
202 ABEK-P3 combination filters
Tabtec A1 gas filters
Tabtec A2 gas filters
Tabtec A2B2E1K1 gas filters
Flexifilter P2 particle filter
Flexifilter P3 particle filter
Flexifilter P3-OR particle filter
* - national types are identical to European Standard, except of marking with R/NR

5.3 Accessories

Description
Advantage+ half masks belt pouch
Covers, R59, ADV. 200,2/PKG
Filter type Part No.
EN 143:2000 P2 R 10011347
DSTU EN 143:2002 P2
EN 143:2000 P3 R 430375
DSTU EN 143:2002 P3
EN 14387 A2 430371
DSTU EN 14387:2017 A2
EN 14387 K2 10107163
DSTU EN 14387:2017 K2
EN 14387 A1, B1, E1 10144827
DSTU EN 14387:2017 A1 B1 E1
EN 14387 A2, B2, E1, K1 430373
DSTU EN 14387:2017 A2 B2 E1 K1
EN 14387 A2 P3 R 430372
DSTU EN 14387:2017 P3
EN 14387 K2 P3 R 10107165
DSTU EN 14387:2017 K2 P3
EN 14387 A1, B1, E1 P3 R 10144828
DSTU EN 14387:2017 A1 B1 E1 P3
EN 14387 A2, B2, E1, K1 P3 R 430374
DSTU EN 14387:2017 A2 B2 E1 K1 P3
EN 14387 A1 10030510
EN 14387 A2 10030511
EN 14387 A2, B2, E1, K1 10038476
EN 143:2000 P2 R 10027699
EN 143:2000 P3 R 10027639
EN 143:2000 P3 R 10027697
Part No.
10016038
815401
GB