Saeco DUALLY CAP030A Manuel D'opération page 96

English
The PASSWORD will not
be requested if set on
value 0000.
In case you do not enter the
password within 4 seconds
the machine goes back to
the previous screen.
If the PASSWORD
forgotten, you can reset it
by entering a PUK code.
You have to request the
PUK code to the Technical
Service, who will guide you
through the procedure.
96
8.5.1 Password setting
It is possible to set two different passwords to access the
two different menus, the user menu and the technical menu.
Only
Technician
change
password to access the
Technical menu.
is
To set the User Menu PASSWORD, proceed as
follows:
- Switch to programming mode as described in the previous
chapters.
- Press the "Down" button to scroll through the menu until
the "Change password" option:
- Press the "OK" button to enter the submenu of the
selected option.
- Enter the current password.
the Maintenance
is able
the default
to